|Product Name:||HHO Carbon Cleaning Machine||Function:||Automotive Carbon Clean|
hydrogen engine cleaning machine,
engine cleaning system
Diesel Engine Cleaning Service Engine Decarbonising Products Carbon Cleaning Machine Price
The microscopic process of hydrogen and oxygen removal of carbon deposits is as follows:
1) During the intake of the engine, hydrogen and oxygen gas is drawn into the engine.
a. The hydrogen gas is very light and quickly diffuses into the engine compartment.
b. Hydrogen has a very good characteristic, that is, the adhesion ability, always attached to the inner wall of the engine, which is the place with the most carbon deposit.
c. Another characteristic of hydrogen is the ability to penetrate. Because of the small number of molecules of hydrogen, it can quickly penetrate into the surface layer of carbon deposits.
2) Engine injection
3) Engine ignition
a. The first stage: oil, air, hydrogen attached to the carbon surface, oxygen is lit, resulting in carbon oxides (mainly carbon dioxide), nitrogen oxides, high temperature water vapor and hydroxide ion clusters.
b. The second stage: water vapor, hydroxide ion clusters and carbon deposits undergo high temperature water gas reaction, carbon deposits with hydroxide ions attached are oxidized to carbon monoxide and further oxidized to carbon dioxide
4) Engine compression work
The carbon deposit is discharged through the exhaust system by gas
|Gas Output||1500L/h ±10%|
|Working Pressure||≤0.2 Mpa|
|Ambient temperature range||5°C~50°C|
Why should do carbon cleaning for cars?
1. There are many reasons for increased carbon deposits: incomplete combustion, poor oil quality, bad driving habit, low speed driving for a long time, poor air quality, etc.
2. The carbon deposits causes ‘engine trembling, cold start failure, driving weakness, fuel oil consumption increased, exhaust emissions exceeded the standard’ and other failure.
3. The increased carbon deposits will heavily effect the vehicle performance, resulting in 90% of engine component failures, fuel consumption increased, excessive exhaust emission, shorten the lifetime of engine and other relative accessories.
1. All the production process have a professional person to test the machine and parts.
2. Products of our company all passed CE, FCC and other certificates.
3. Our machine are tested before exportation.