products

Ultrasonic Fuel Injector Cleaning Solution For Gas Engines Personal Design

Basic Information
Place of Origin: China
Brand Name: Zeayeto
Certification: CE,FCC
Model Number: FIC-601
Minimum Order Quantity: 1 Set
Price: Negotiate
Packaging Details: Wooden carton
Delivery Time: 5-10 work days
Payment Terms: L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability: 1000 sets/month
Contact Now
Detail Information
Product Name: Fuel Injector Cleaner And Tester Weight: 27kg
Host Power: 230W Relative Humidity: <85%
Applicable Models: Gasoline Car Frequency: 50/60Hz
Ambient Temperature Range: -10°C~40°C Timing Range: 1-9999s
High Light:

fuel injector testing equipmen

,

electronic fuel injector tester


Product Description

Engine Fuel Injector Tester Machine Fuel Injector Testing Machine Personal Design

 

Description

When the quality of gasoline is poor or the vehicle is running for a long time, if the injector is not cleaned for a long time, the clogging phenomenon will be more serious, causing poor engine fuel injection, poor fuel injection angle and atomization, resulting in engine idling and acceleration. In the case of full-load working conditions, the engine power is reduced, the fuel consumption is increased, the pollution is increased, and the engine is not working. Therefore, the injector should be carefully cleaned regularly to ensure it works well.

 

Preparation

1) Remove the injector from the vehicle engine to check the o-rings inside for damage. Replace the damaged 0-ring with another same type 0-ring to avoid leakage during testing. Put the outside of injectors in gasoline or detergent, and wipe them with soft cloth after cleaning the outside oil sludge carefully.

2) Check the liquid level and refill test liquid when necessary. Fil1 the test liquid through the filler on the side of the unit and observe the liquid level in the fuel level viewer. In most cases, filled the liquid up to1/2 of the tank capacity.

3) Turn on the power switch on the right of the Cabinet.

4) Fill ultrasonic detergent into the ultrasonic cleaning launder so that the needle valve of the injector is covered by the detergent.

5) Connect the injectors with the right couplers.

 

Note:Test liquid and detergent are provided by user self. The test liquid is used for uniformity/sprayability test, leakage test, injecting flow test and Automatic Test. The mixture of fuel and detergent is used in on-vehicle cleaning. The ultrasonic cleaning uses special injector detergent.

 

Parameters

Product name Injector cleaner and tester machine
Voltage AC 220V±10%
Power 230W
Relative humidity <85%
Net Weight 27kg
Ambient temperature range -10°C~40°C
Dimensions 390mmx400mmx500mm

 

Ultrasonic Fuel Injector Cleaning Solution For Gas Engines Personal Design

Contact Details
sales

Phone Number : +8613632760179

WhatsApp : +8613632760179