|Name:||Walnut Sand Carbon Cleaning||Power:||1500W|
car engine carbon cleaning machine,
carbon cleaning equipment
Car Walnut Sand Carbon Deposition Cleaning Machine For Workshop & Engine System
The development of the Walnut sand carbon removal machine is used for removing the carbon deposit of the engine intake valve and intake system. This device can apply to various brand types of engines, such as Bench, BMW, Audi, Land Rover, Bentley, Porsche, Volkswagen, etc. The advantage of this machine uses Walnut sand particles because it's natural organic environmental protection and no damage to the engine body. Needn't any chemical cleaning agent in the process of cleaning the intake valve and intake pipe. The Walnut sand particles will be sucked when the clean finished, and will not any remains.
|Compressed air consumption||0.5m³/min|
|Sandblasting tube||BMW N54/55|
Why need clean carbon deposition?
Carbon deposition will decrease air-fuel ratio, cut down engine output power, increase fuel consumption, engine drastic shake on the idle status...
all the things will hurt the engine deeply.
So normally we should clean carbon deposition after every 40000-50000 kilometer trip
Parts installation method
1.Returning host disassembly
Open the lock switch on both sides of the fuselage, and move the handrail upwards to remove the main part of the returning machine.
2. Disassembly and assembly of the filter
Turn the main unit over and you can see the dust filter. There is a locking cover in the center of the filter. The filter can be removed from the top plate.
3. Installation of the return pipe
Insert the hose assembly into the carbon removal recovery port, and confirm that the installation is completed after plugging.
4. Cleaning joint installation
Clean the joint and connect one end of the hose assembly. After inserting, confirm that the seal is in place and the installation is complete.